Saia Burgess Controls PCD7.D410VT5F, Manual, Page: 47 / 73

Saia-Burgess Controls AG
Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20
7-3
Updating and special settings
Typefaces supported by MB panel PCD7.D4xx
7
7.4 Typefaces supported by MB panel PCD7.D4xx
Default fonts available for the VGA MB panel
FONT SIZE
Fonts and formats 10 12 14 16 20 24 36
Arial × × × × × ×
Arial Bold
× × × ×
Courier New × × ×
Courier New Bold × ×
Tahoma
× × × ×
Tahoma Bold × × ×
Calculating the given amount of play for:
Single text field, multi-line text field, edit field for text field, and button with text.
Definitions:
Font size: Character size (font size in pixels)
Y-dimension: Size of the graphical symbol (in pixels)
X-dimension: Width of a character
Text length: Length of a single-line piece of text.
Text field: Length of the painter
General recommendations for text fields (you can find info in the online help for
the first version of Web Editor)
We recommend using text fields exceeding the size displayed in the Editor by up
to 20%. To determine the text field length, you can also consult the following table
of the min. and max. X-dimension.
General recommendations for the Y-dimension in proportion to the font size and
format
Basic rule : The text should be INSIDE the contours.
For buttons and edit fields, a shadow of 2 pixels is added (to the inside of the
button contours and to the outside of the edit fields).
If the text is too large for the edit field, it is overlaid by the border and the 3D
shadow.