Waterproof Scale Operation Instruction
10
5-2. Output data
The screen displays
AdS- r X
. X values from 0-3 that decide output data of serial protocol to
computer.User can demand a customize serial protocol.
X=0. It is the standard data, It is Displayed weight, Gross weight, Net weight,Tare weight with ASCII code.
X=1-3, it is customize data.
Press
[▲]
to select the value and press
[MODE]
to confirm.
5.3 The beginning of bit
The screen displays
“rs HI / LO”
. It means the beginning of bit of format .
HI:
means the weigh value is sending from High location. Say weight is 2.00. It sends data with “ 2.00”.
LO:
means the weigh value is sending from Low location. Say weight is 2.00. It sends data with “ 00.2”.
Press
[▲]
to select the value and press [MODE] to confirm.
5.4 Data transfer mode
The screen displays
“rA= X”
. It means data transfer mode to computer.
1. X=0: Indicator will send out continuous data automatically reach to 10 times per second.
2. X=1: Indicator will send out continuous data automatically reach to 1 time per second.
3. X=2: Indicator will send out continuous data after the weighing is stable.
4. X=3: Indicator will send out 1 data after the weighing is stable.
Press
[▲]
to select the value and press [MODE] to confirm and finish to set the Serial protocol.
Step 6: Weight response speed Filtering setting
The screen displays
“ bUF AB ”
.
A
: It means the response speed when weighing.
Speeder increases by number. “0” is the fastest speed, “3” is lowest speed.
B
: It means filter strength when weighing.
Strength increases by number. “0” is minimum, “3” is maximum.
Press
[►] & [▲]
to select and press
[MODE]
to confirm.
Step 7:
Hold function
The screen displays
“ -HoLd-”
.There are three types of hold functions which can be used for different
purposes. Press [MODE] to ignore the setting if no need, and enter next step.
7.1 Weighing hold mode
Press
[►]
to enter setting and
“ FLt0. X ”
will display on screen. There are 5 kinds of weighing hold
mode.
X=0, it is without hold function.
X=1, the display weight is hold while it is stable with effective time.
X=2, the display weight is hold while pressing
[MODE]
anytime, press
[MODE]
to refresh.
X=3, Peak hold. Holds the maximum weight, press
[MODE]
to refresh.
Press
[▲]
to select and press
[MODE]
to confirm.
7.2 Hold effective time
The screen displays
“FLt1. X ”
. It is the effective time that hold function operate while set
“Flt0 =1
”.
X=0, the display weight is hold while it is stable at once.
