76
3410330_GB
CONDENSING SYSTEM MAINTENANCE
Mod. …51M – …101L – …101S
To access the condensing system, remove the rear protective
grille, undoing the screws.
Mod. …51H
To access the condensing system, remove the side panel,
undoing the screws.
REPLACEMENT CORE PROBE
Turn the connector anti-clockwise,
completely unscrewing it so as to
disconnect the core probe cable.
Replace the core probe, screwing the connector
completely back in.
Take care when inserting the connector so that all
contact pins are perfectly aligned with those on the
fixed connector attached to the door. Failure to do so
may lead to probe breakage.
