My phone in 5 minutes
21
We want to familiarise you with the interface of your new phone, using a simple setting: choosing a ring tone and adjusting
the volume.
Volume and ring tone
This menu allows you to allocate a ring tone to each type of event.
In the
home page
, press the
down
T
key to access the main menus.
The first menu offered is
Phonebook
.
Press the
down
T
key four times to access the
Sounds
menu.
Enter
this menu by pressing the
right programmable key
.
You can access the
second level
of the menu that contains four sub-menus: Ring tones, Vibrate, Silent mode, beeps.
The first sub-menu offered is
Ring tones
.
Enter
by pressing the
right programmable key
.
With the help of the
down
/
up
T
S
keys select the type of function where you want to change the ring tone from the
proposed list (Alarm, Calls, Messages and Local Infos) and accept.
Enter
by pressing the
right programmable key
.
Using the
down
/
up
T
S
keys select the ring tone from the list offered.
Enter
by pressing the
right programmable key
.
For every new selection, you will hear the corresponding ring.
If required, press the
Silent mode key
to cancel the sound.
Adjust the volume using the
down
/
up
T
S
keys.
The volume is adjusted over a scale of 1 to 4.
The ring tone is played at the chosen level whenever a change is made.
You can select "+"
volume
to choose a ring that starts quietly and rises to a crescendo.
Accept
by pressing the
right programmable key
.
251959374_myX2-2_lu_en.book Page 21 Mercredi, 30. mars 2005 11:48 11
