SAGEM F@st
TM
908 / 948 Reference Manual - Ethernet Interface
7
2. "BridgeMon" diagnostics application
This application is used to ascertain the status of the ADSL connection and the data transfer
rates. For this, it must be installed on the computer connected to the
SAGEM F@st™ 908 / 948.
This application is not essential to ADSL modem operation. We do, however, recommend its
installation on your computer. It will provide you with a better understanding of your ADSL line
status.
2.1
BridgeMon application compatibility information
The BridgeMon diagnostics application is compatible with the following operating systems:
•
Microsoft
Windows
98,
•
Microsoft
Windows
Millenium,
•
Microsoft
Windows
2000,
•
Microsoft
Windows
XP,
•
MacOS
X,
•
Linux.
2.2
Installation in Windows XP
The
installation
procedure described in the section below was performed using
Windows
XP
. The procedure for other Windows
operating systems (98, ME and
2000) may differ slightly.
1
Insert the CD-ROM in your computer's
CD-ROM drive; the screen opposite
then appears.
Click
Ethernet use
to set up your
computer's Ethernet interface.
Note:
If this screen does not appear: Select Start, Run, then enter: "< CD-ROM driver
letter > :\autorun.exe" (for example e:\autorun.exe) then click
OK
.
Summary of Contents for 908
Page 35: ......
