3-64
Using the Operator Panel
Automatic Form Feed Timeout Setting
If the printer receives no data for a certain period, it will time out and release the
current interface. It prints whatever data it has in its buffer and feeds out the page.
The default form feed timeout time is 30 seconds.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
repeatedly until
>Form Feed Time Out
appears.
To change the timeout time, press
[OK]
. A blinking cursor (_) appears.
Press
ou
to increase or decrease the value at the blinking cursor and
set the desired time. The timeout time can be between 0 and 495 seconds, in
5-second increments. Use
and
to move the cursor right and left.
When the desired timeout time is displayed, press
[OK]
.
To exit the menu selection, press
[MENU]
.
Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power when the printer is not
printing, processing, or receiving data.
Press
[MENU]
.
Press
or
repeatedly until
Others >
appears.
Press
.
Press
or
repeatedly until
>Sleep Timer >
appears.
Press
display
>>Auto Sleep
.
To turn off the sleep timer, press
[OK]
. A blinking question mark (?) appears.
Press
or
pto change On to Off.
Press sur
[OK]
. The sleep timer is turned off.
To exit the menu selection, press
[MENU]
.
LU 252 745 005 Fonctions d'impression HFF GB.book Page 64 Mercredi, 7. juin 2006 4:56 16
