3-39
Using the Operator Panel
Setting Print Quality
In Print Quality menus, you can set the KIR mode, EcoPrint mode, and other
settings.
KIR Mode
This printer incorporates the KIR (Kyocera Image Refinement) smoothing function.
KIR users the software to enhance resolution, resulting in high quality printing at
resolution of 600 dpi and 300 dpi. The default is On. KIR has no effect on the printing
speed.
Note :
Set the print density to 03 when setting the KIR mode. For details on the print den-
sity, refer to Print Density on page -41. You can monitor the KIR test pattern, the last
line on a status page, to make the optimum KIR mode setting.
Look at the check line, the last line on a status page, to make the optimum KIR mode
setting.
Optimized stripes
The current KIR setting is optimal.
With KIR
Off
With KIR
On
(default)
Status Page
KIR Test Pattern
LU 252 745 005 Fonctions d'impression HFF GB.book Page 39 Mercredi, 7. juin 2006 4:56 16
