5
Unless stated otherwise, all dimensions are given in mm.
MANTO®
1
MANTO formwork
MANTO formwork from Hünnebeck is rugged, ready-to-use frame panel formwork for
all fields of concrete construction. All MANTO panels have sturdy 14 cm thick steel
frame profiles that are hot dip galvanized on the inside and outside. The maximum
fresh concrete pressure permitted is 80 kN/m².
The design of the MANTO panels permits the use of the panels in vertical or horizontal
orientation. Extension panels and other accessories further extend the scope of use
and assure safe and economical shuttering and concrete works. The “lever edge” in
the lower edge profiles allows alignment of the erected panels using a crowbar. Interior
H-ribs as well as V-ribs (only MANTO G3/G3 M) offer several different ways to attach
accessories and support the form sheet.
The various connectors available can be used to ensure that all vertical, horizontal and
extended panel joints fit tightly together and the panels are aligned perfectly without
any mismatch. This also allows large-area panels to be repositioned without having
to install any additional stiffening walers. Many connectors can be operated with the
MANTO Ratchet or with a hammer. Using the MANTO Ratchet reduces fatigue when
working from ground level (for single-storey formwork).
The permissible fresh concrete pressure for MANTO Giant Panels 240, Inner Cor-
ners 120 and 270, and Hinged Corners 120 and 270 built until 1991 is 60 kN/m² (Refer to
1.1 Intended use
MANTO formwork and the corresponding system components are used to wet-pour
concrete structures of various geometries, e.g. walls or columns. Only the components
shown in this manual may be used to connect the panels to one another. The permitted
concrete pressure may not be exceeded.
Hünnebeck products are intended to be used only by competent personnel and only
for commercial purposes.
1.2 General information
This user guide contains important information regarding the assembly and use of
MANTO as well as safety procedures that are important for safe erection and use on
site. This user guide is intended to support effective working processes with MANTO.
It is essential to carefully read this user guide before erecting and using the MANTO
formwork system. Keep the user guide nearby and save it for future reference.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
