170
Constructing working platforms
Unless stated otherwise, all dimensions are given in mm.
15.4 Counter Post
Use the Counter Post to erect edge protection on the opposite side of the platform. As
with the Walkway Bracket, the Counter Post is secured to the top rib of the panel. Use
the integrated Spring Cotter Pin 4 to secure the Counter Post.
The inclined position of the Counter Post means that the required clearance for pouring
operations is achieved. The Counter Post can be fastened to panels lying flat when an
additional Waler Bolt D20 is used.
See
details
below.
The Toe Board Retainer, marked with red paint, is attached to the Counter Post in the
following way:
1
2
4
3
1620
Counter Post
(code:600814)
Toe Board
Retainer
(code:603609)
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
