111
Unless stated otherwise, all dimensions are given in mm.
MANTO®
Position 0
Position -1
Decisive for the correct set-up of the PLATINUM 100 Tie Rod is to know if the tie nut on
the advancing formwork side is equipped with a pin clip or not. (Refer to Section 9.3.1
on page 106.)
If the pin clip is installed, the tie rod stops at the pin clip when screwed into the tie nut.
If the pin clip has been removed, the PLATINUM 100 Tie Rod has to be screwed com-
pletely into the tie nut on the advancing side.
This allows different wall thicknesses to be set (with pin clip 140 - 265 mm, without pin
clip 275 - 400 mm).
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
