MorphoAccess® SIGMA Series - Administrator Guide
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
421
July 17
Configuring Schedules
Define Access Schedule
Access Schedules is used to define a time slot, during which access is allowed, for example
during working hours of working days. Before and after the selected timings, the access is
denied to the user, even if authenticated successfully.
Access schedule enables to define time slots for entire week. A time slot is defined by selecting
a start time and end time in hours and minutes. An Access Schedule can have up to two time
slots per day.
Maximum 64 access schedules can be created, where by
By default, Schedule no. 0 is defined as access denied at whichever time the access is
requested
By default, Schedule no. 63 is defined as FULL access time slot. On user enrolment,
Access Schedule 63 is assigned by default.
Schedule no. 59 to Schedule no. 62 is reserved for internal use and cannot be assigned
to any user.
On user enrolment, administrator can select the required access schedule and associate it with
the user details. E.g. Access Schedule 1 is created and has access rights in time slot from 8:00
am 13:00 pm and then from 14:00 pm to 20:00 pm (with interval being from 13:00 pm to 14:00
pm). User is granted access only from 8:00 to 13:00 and from 14:00 to 20:00.
Every time on successful authentication of the user, the terminal will also check access schedule
selected for the user and will allow access according to the defined schedule.
Using Webserver, an administrator can configure Access Schedule, for MorphoAccess® SIGMA
Family terminals. Besides Webserver, these configurations are possible via MorphoBioToolbox
and distant commands also.