MorphoAccess® SIGMA Series - Administrator Guide
Multifactor Access Control Mode
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
396
July 17
Multi-factor Mode
Description
The MorphoAccess® SIGMA Family terminal authorizes simultaneous activation of the access
control mode by identification and one of the access control modes by authentication.
This is the first user action which automatically selects the access right control process to be
executed.
User Interface
In this mode the terminal is waiting for the placement of a finger on the biometric sensor, or for
the presentation of a user’s card. It will execute the following:
the identification process if the user places his finger on the biometric sensor first,
Or the authentication process if the user shows his card first.
Figure 335:
Multi-factor mode (identification or authentication)
In case the User database is empty, the identification mode (with finger) is automatically
disabled, but the authentication mode is still available (by showing the card).
User’s data required in the terminal
The same data as that is required by the “Identification Mode Description” and “Authentication
Process”, needs to be configured in the terminal database. Please refer to the corresponding
sections.
User’s data required on the user’s card
The items required on the user’s card depend on the activated authentication mode(s). For
example, the User’s Card needs to have the User ID + User Pin, when PIN verification is
mandatory. Please refer to “Authentication Process” section for more details.
Step 1: Present Card
Step 2: Place Fingerprint
Verified
OR