Safran MorphoAccess SIGMA Series Administration Manual Download Page 23 | Manualshive

Page: 23 / 517

Safran MorphoAccess SIGMA Series Administration Manual Download Page 23

MorphoAccess® SIGMA Family Administrator Guide

Connecting the Terminal to a PC

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

23

July 17

General

Why would one connect the terminal to a PC?

The MorphoAccess® SIGMA Family terminal is designed to be able to run in standalone mode,
it means without any connection to a master system. But sometimes, a connection with a PC is
useful to perform tasks like:



Configuring the terminal.



Maintaining terminal: firmware upgrade, add a license (to unlock an optional feature)



Managing the database, i.e., adding or deleting or modifying the user data.



Managing log files, i.e., get or delete the log files.



Configuring the Wi-Fi™ connection.

Connection methods

The MorphoAccess® SIGMA Family terminal can be connected to a PC by an Ethernet cable,
either directly or through a LAN. The LAN can be reduced to only one Ethernet switch.

Once physically connected, the MorphoAccess® SIGMA Family terminal can be configured using
an application such as MorphoBioToolbox.

A POE (Power over Ethernet) current injector is mandatory if the MorphoAccess® SIGMA Family
terminal is not powered by the +12VDC/GND wires block.

Network parameter initialization

The ‘default’ network parameters of the MorphoAccess® SIGMA Family terminal are:

IP address Mode

Parameter

Factory value

Static

Terminal IP address

192.168.1.10

Gateway IP address

192.168.1.254

Sub network mask

255.255.254.0

Host name

MAsigma/MAsigma-lite/MAsigma-lite-
plus/MAextreme

If the terminal’s default network parameter values cannot be used, it is recommended to refer
to the “Communication menu” to change these values.

«
...
21
22
23
24
25
...
»

Summary of Contents for MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Reviews:

No comments