Safran Morpho MorphoWave OEM Installation Manual Download Page 85

Page: 85 / 102

MorphoWave

OEM

Annex 1 : Maintenance

2015_2000009096 V4
May 2017

This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho

Ethernet switch change procedure

To replace the Ethernet switch:



Turn off the entire system (MorphoAccess Sigma Wave, MorphoWave

Desktop,

PC,Ethernet switch).



Unplug the Ethernet switch and replace it by the new one.



Please take care to follow Ethernet port configuration as below.



Turn on the whole system.



Once the boot procedure is finished (boot time may take several minutes depending

of the database size) the MorphoWave

Desktop shall have green lighting on and

identification will work if at least one user is in database.

Summary of Contents for Morpho MorphoWave OEM






































































































Search results

Summary of Contents for Morpho MorphoWave OEM

Reviews:

Related manuals for Morpho MorphoWave OEM

Brands by name

Popular brands

Safran Morpho MorphoWave OEM, Installation Manual

Search results

Summary of Contents for Morpho MorphoWave OEM

Reviews:

Related manuals for Morpho MorphoWave OEM

Brands by name

Popular brands