Safran CORTEX CRT Quantum, User Manual

Page: 88 / 346

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 8
2.3.3.2.
Chassis 2U IS00452
2.3.3.2.1. Configuration S100684: COMSAT 2U without EFC
The connection of the various signals to the user system is directly performed on the chassis rear panel as
described in 2.3.1.1. The computer connections (LAN, VGA) are directly available on the Industrial Computer
rear panel. The picture below lists and identifies the various connections to the computer ports, and the I/O
connectors of the Cortex CRT Quantum dedicated hardware.
Figure 16: Configuration S100684 Rear panel Connectors
Table 10: Configuration S100684 Rear panel Connectors
Connecto
r
Usage Connector Usage
1 Upper power supply unlock system 17 Uplink
– IF Alternate 2
2 Upper power supply AC input 18 Downlink
– IF Alternate 1
3 Lower power supply unlock system 19 Downlink
– IF Alternate 2
4 Lower power supply AC input 20 Downlink
– IF Alternate 3
5 Power supply Sound Alarm Button 21 AGC out 1
6 Mechanical Ground 22 AGC out 2
7 NIC1
– LAN
23 AGC out 3
8 NIC2
– LAN
24 Video out 1
9 VGA 25 Video out 2
10 USB 3.0 26 Reserved
11 Uplink
– IF Nominal 1
27 Reference Frequency 1
12 Uplink
– IF Nominal 2
28 Reference Frequency 2
13 Downlink
– IF Nominal 1
29 IRIG In
14 Downlink
– IF Nominal 2
30 Downlink
– Auxiliary 1
15 Downlink
– IF Nominal 3
31 Downlink
– Auxiliary 2
16 Uplink
– IF Alternate 1
32 1-PPS In