Safran Vectronix TERRAPIN X, User Manual, Page: 22 / 124

22
à
Depending on the configuration, the measurement data will be trans-
mitted via Bluetooth to a receiving device (e.g. Smartphone or Kestrel
Weather Meter).
à
A fast flashing Bluetooth symbol is indicating a Bluetooth connection
error.
SCAN MoDE
The device can also be used for continuous range measurements (scan mode).
X
Press and release the push button to turn on the device.
The electronic aiming mark appears.
X
Press and hold down the push button for more than two seconds to activate the
scan mode.