5.5.4.
HI / LO Alert
To set HI/LO temperature alert:
1.
Press the up/down button to select the HI/LO Alert option in the Settings menú
2.
Press the SET button to enter the HI/LO Alert submenú
3.
Press the up/down button to select the desired option
4.
Select HI or LO to adjust the temperature parameter
5.
Select other options to turn the alert on or off
6.
Press the back button to exit
5.5.5.
Measurements
To set measurements parameters:
1.
Press the up/down button to select the Measurements option in the Settings menú
2.
Press the SET button to enter the Measurements submenú
3.
Press the up/down button to select the Emissivity or Temperature Comp
(Temperature Compensation)
4.
Press the SET button to enter the parameters adjustment statetemperature
parameter
5.
Press the up/down button to increase or decrease the value
6.
Press the SET button to save the current setting
7.
Press the back button to exit
NOTE: For emissivity values of common materials, please refer to the Common Emissivity
5.5.6.
Display Brightness
To set Display Brightness:
1.
Press the up/down button to select the Display Brightness option in the Settings
menú
2.
Press the SET button to enter the Display Brightness submenú
3.
Press the up/down button to select the desired brightness level from Low, Medium
and High
4.
Press the SET button to confirm
5.
Press the back button to exit
5.5.7.
Auto Power Off
To set Auto power off:
1.
Press the up/down button to select the Auto power off option in the Settings menú
2.
Press the SET button to enter the Auto power off submenú
3.
Press the up/down button to select the desired option from 5, 10, 30 minutes or Off
4.
Press the SET button to confirm
5.
Press the back button to exit