User Manual of HD-TVI Speed Dome
13
3.3
Configuring Image Parameters
3.3.3
Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu:
MAIN MENUS > DOME SETTINGS >CAMERA SETTINGS
CAMERA
FOCUS AF
ZOOM LIMIT 22
ZOOM SPEED HIGH
SLOW SHUTTER ON
DAY/NIGHT AUTO
D/N SENSITIVITY 1
SHARPNESS 8
BACK EXIT
CAMERA
BLC/WDR OFF
BLC LEVEL N/A
EXP MODE AUTO
IRIS 10
SHUTTER 50
GAIN N/A
EXPOSURE COMP 7
BACK EXIT
CAMERA
WB MODE AUTO
RED 210
BLUE 150
IMAGE FLIP OFF
FOCUS LIMIT 1M
2D DNR 1
3D DNR 2
BACK EXIT
CAMERA
MIN. ZOOM LIMIT 2.0
CHROMA SUPPRESS 1
SATURATION 1
CONTRAST OFF
SCENE MODE INDOOR
HLC ON
SHARPNESS COMP 15
BACK EXIT
CAMERA
GAIN LIMIT 15
DEFOG OFF
INIT LENS OFF
BACK EXIT
Figure 3-7
Camera Settings
Task 1:
Configure the focus settings.
⚫
Setting the focus mode
Steps:
(1)
Move the cursor to
FOCUS
using the direction buttons and click
IRIS+
to enter.
(2)
Click up/down direction buttons to set the focus mode to
AF
,
MF
or
HAF
.
AF
(Auto-focus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): You need to adjust the focus with
Focus+
and
Focus-
buttons manually.
HAF
(Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
(3)
Click
IRIS+
button to save the settings.
⚫
Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
