M2050 Recovery System
User Instruction Manual
I
NSTRUCTION
# IM-0017 REVB
I
SSUE
D
ATE
10/28/10
E
XPIRATION
D
ATE
10/28/20
4451 Raceway Dr • Concord, NC 28027 • Customer Service Phone (800) 560-1094 • Fax (800) 560-1275
Page 5 of 7
205G-50 3-Way Unit Installation and Use
Pulley assembly at top of M10
Figure 4
Figure 5
Figure 6
Mode Selector
Mode Selector
205G-50 3-Way Unit mounted on
M10 Tripod with the M10B-1
mounting bracket.
Locking pin that
secures 205G-50 to
the M10B-1
Mounting Bracket.
Adjustable bar for size of
3-way unit handle to fit in.
Pin to secure
3-way unit
M10B-1 3-Way Mounting Bracket for
205G-50, 75 and 100.
Slot for leg of tripod
3-Way Unit Mounting Instructions
1. Place M10B-1 mounting bracket on leg of tripod and secure with bolts supplied with the bracket. Place 3-Way Unit on mounting
bracket as shown in figure 4. Be sure to match up holes on mounting bracket so 3-way unit will allow the pin to secure the large
hanger of 3-way unit to the bracket. Using pins supplied with bracket, mount as shown in Figure 5.
2. Open the pulley and run the 3-Way units’ cable through the pulley, see Figure 6. Reassemble the pulley with cable in it and put back
on hanger up in the head of the tripod as shown in Figure 6.
3. Be sure to test the action of the unit before using.
4. The small button on the side of the 205G is the mode selector: SRL, or Retrieval. See Figure 4 and Figure 5 for location.