Latitude Pro
7’ Arc Flash SRL Manual
THESE DEVICES MEET OR EXCEED:
ANSI Z359.14, ASTM 887-18, NFPA 70E, and are 40 cal rated
This manual is intended to meet the manufacturer’s instructions as
required by ANSI Z359.14 and should be used as part
of an employee training program as required by OSHA.
WARNING
This product is part of a personal fall arrest, work positioning, or rescue system. The manufacturer’s instructions must be provided to
users of this equipment. The user must follow the manufacturer’s instructions for each component of the system. The user must read and
understand these instructions before using this equipment. Manufacturer’s instructions must be followed for proper use and maintenance
of this equipment. Alterations to this product, misuse of this product, or failure to follow instructions may result in serious injury or death.
IMPORTANT
Questions regarding the use, care, or suitability of this equipment for your application? Contact Safewaze.
IMPORTANT
Record identification information before using this product. Identification information may be found on the equipment label
(See Figure 11). This information should be recorded in the “Inspection and Maintenance Log” located at the back of this manual (Page 16).
MANUAL - 220-00042
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
1
2
PUSH
SLIDE TO OPEN
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
1
2
PUSH
SLIDE TO OPEN
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
