User Manual
V1.0 2022 Copyright Safewaze
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
The behind the web bracket comes fully assembled and ready for installation. No tools are required for installation of the
bracket onto harness. Use the following instructions and Figure 13 to install the bracket:
To Fasten To Harness:
1. Unfasten the two small brackets on the green retractable spacer off of the carabiner.
2. Slide the green spacer around to the side of carabiner to allow opening of the carabiner gate.
3. Open the carabiner gate and slide spacer off of carabiner and remove one of the retractables.
4. Holding gate open on carabiner, insert the open end of carabiner through the webbing loops at Dorsal D-ring on
the X Pad of harness. Ensure that both loops of webbing on X Pad are inside of carabiner.
5. With carabiner gate still open, slide the removed retractable and green spacer back onto carabiner and allow
carabiner gate to close.
6. Slide the green retractable spacer back over the gate of carabiner and snap the two small brackets back into
place on carabiner, with the web loops positioned between these two small brackets.
X Pad
Bracket
Bracket
FS-EX313
Bracket
Carabiner
If choosing a Dual Leg SRL equipped with the FS-EX313 Dual Leg Bracket, installation and removal is a quick and easy
process. Units ordered with the FS-EX313 come fully assembled with the bracket attached to the SRLs. Simply attach
the units to the dorsal D-ring of the harness with the provided double locking carabiner (See Figure 14).
FIGURE 13 - FS1014-TL-BLACK-BWB INSTALLATION
FIGURE 14 - FS-EX313 INSTALLATION
16.3 FS1014-TL-BLACK-BWB
16.4 FS-EX313 DUAL LEG BRACKET
LOAD IN
DICATO
R
LOA
D IN
DIC
ATO
R
A
FALL-ARREST
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020053
Carabiner
Dorsal
D-ring
FS-EX313
Bracket
Some models of the Safewaze FBH may include an integral Dorsal Link connection for installation of Dual SRLs. The
Dorsal Link offers a simple connection for Dual Leg SRLs, while also acting as a Dorsal D-ring extender. Simply attach
the Dual Leg SRLs to the looped end of the Dorsal Link with a dual leg bracket or double locking carabiner. Figure 15
illustrates the Dorsal Link, and attachment of dual leg SRLs.
16.5 DORSAL LINK
11
12