SafetyLink TileLink Installation Handbook Download Page 5

 

Click back to Table of Contents

 

Handbook_TileLink Version 03.16 

 

Page 5 of 12 

WARRANTIES 

  

EXTRACT: SafetyLink Pty Ltd STANDARD TERMS AND CONDITIONS 

 

11.1        To  the  extent  permitted  by  law  all  implied  conditions,  warranties  and  undertakings  are  expressly 

excluded. 

 
11.2        Except as provided in this clause the Company shall not be liable for any loss or damage, whether direct 

or  indirect  (including  consequential  losses  or  damage)  arising  out  of  any  breach  of  contract  by  the 
Company or any negligence of the Company, its employees or agents. 

 
11.3        Should  the  Company  be  liable  for  a  breach  of  a  guarantee,  condition  or  warranty  implied  by  the 

Australian Consumer Law (not being a guarantee, condition or warranty implied by sections 51, 52 and 
53 of that Law) then its liability for a breach of any such condition or warranty express or implied shall be 
limited, at its option, to any one or more of the following. 

 

 A) 

in case of Goods 

(I) 

the replacement of the Goods or the supply of equivalent Goods. 

(II) 

the repair of the goods, 

(III) 

the payment of the cost of replacing the Goods or acquiring equivalent Goods. 

(IV) 

The payment of the cost of having the Goods repaired. 

Provided  that  any  such  Goods  are  returned  to  the  Company  by  the  Purchaser  at  the 
Purchaser’s expense. 

  

B)  

in the case of services 

(i) 

the supply of the services again, 

(ii)  

the payment of the cost of having the services supplies again. 

  
11.4     

The  Company  will  not  liable  for  the  costs  of  recovery  of  the  Goods  from  the  field,  loss  of  use  of  the 
Goods, loss of time, inconvenience, incidental or consequential loss or damage, nor for any other loss or 
damage of her than as stated above, whether ordinary or exemplary, caused either directly or indirectly 
by use of the Goods.  

 
11.5 

The Company warrants that at the time of shipment, Products manufactured by it will be free from defects 
in  material  and  workmanship.    In  the  absence  of  a  modified  written  warranty,  the  Company  agrees  to 
making good any such defects by repairing the same or at the Company ’s option by replacement, for a 
period of (1) one year from the date of shipment.  This limited warranty applies provided that:  

 

(a) 

defects have arising solely from faulty materials or workmanship; 

(b) 

the Products have not received maltreatment, inattention or interference; 

(c) 

the 

Products  have  been  installed  in  accordance  with  the  Company’s    Installation 

Handbooks using only products supplied by the Company; 

(d) 

accessories used with the Products are manufactured by or approved by the Company ; 

(e) 

the Products are maintained in accordance with Australian Standard 1891.4 (section 9). 

(f) 

you  notify  any  claim  under this  warranty  to  SafetyLink  in  writing to  the  address  below  no  later 
than 14 days after the event or occurrence concerning the produce giving rise to the claim and 
you pay all costs related to your claim. 

 

This  warranty  does  not  apply  to  any  defects  or  other  malfunctions  caused  to  the  Goods  by  accident,  neglect, 
vandalism, misuse, alteration, modification or unusual physical, environment or electrical stress. 
 

Please note that the benefits to the purchaser (as a consumer) given by this warranty are in addition to your other 
rights  and  remedies  under  the  Australian  Consumer  Law.    Our  goods  come  with  guarantees  that  cannot  be 
excluded under the Australian Consumer Law.  You are entitled to a replacement or refund for a major failure and 
compensation  for  any  other  reasonably  foreseeable  loss  or  damage.    You  are  also  entitled  to  have  the  goods 
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 
11.6 

If any goods are not manufactured by the Company, the guarantee of the manufacturer thereof shall be 
accepted by the Purchaser as the only express warranty given in respect of the goods. 

 
11.7 

 Except  as  provided  in  this  clause  11,  all  express  and  implied  warranties,  guarantees  and  conditions 

under  statute  or  general  law  as  the  merchantability,  description,  quality,  suitability  or  fitness  of  the 
Products for any purpose or as to design, assembly, installation, materials or workmanship or otherwise 
are hereby expressly excluded (to the extent to which they may be excluded by law).  

 

PLEASE SEE SAFETYLINK PTY LTD FULL STANDARD TERMS OF CONDITIONS OF 

SALE FOR FURTHER REFERENCE.

 

 

Summary of Contents for TileLink













Reviews: