background image

www.safetyxpress.com.au

PRODUCT INFORMATION & 

INSTALLATION GUIDE

1300 049 246

Specifications

SKU

BOLSM165

Material

Hot Dip Galvanised Steel

Colour

Powder  Coated  Yellow  with    

Class 1 Red Reflective Tape

Black Plastic Cap on top

Dimensions:

Height: 

1300mm 

Diameter: 

165mm (Pole) 300mm (Base)

Wall Thickness:

 3mm

Base:

 4 Mounting Holes 

16mm each in Diameter

Item Weight

21kg

Fixings

4 x FREE Mounting Bolts 

Included per bollard 

(standard fixings kit)

Surface Mount Bollard

Installation:

1. Read instruction steps from beginning to end.

2.  Determine  exactly  where  the  bollard  will 

be placed. If you are installing more than one 

bollard, it is a good idea to mark the ground to 

ensure that you have a straight line to assist you 

with the correct placement of your bollards. 

3. Using your hammer drill, drill a guide hole in 

the  surface,  through  each  hole  in  the  bollard 

using the drill bit. (This is to mark the surface so 

that you know where to continue to drill). 

Tools Required:

• 

Hammer drill with 14mm drill bit

• 

Fixing kit

• 

The correct sized socket

•  A hammer

• 

A hand broom or industrial vacuum

4.Remove the bollard and brush or vacuum away 

the dust. 

5.  Continue  to  drill  each  guide  hole  to  almost  the 

entire length of your fixings. 

6. If you are using a plastic plug component, put it in 

the drilled hole and hammer in.

7. Place the bollard over the holes, line up and place 

your fixing in the holes and screw or hammer in.

8. Use your socket to tighten the screw if applicable. 

Be careful not to overtighten.

FREE

Fixings

Reflective

2

2

MONTHS

MONTHS

Reviews: