Main: 713.896.6600
Toll Free: 800.880.8855
www.safetyvision.com
6100 W. Sam Houston Pkwy. N.
Houston, TX 77041-5113
Copyright © 2015 Safety Vision, LLC All Rights Reserved.
500A/620A QUICK INSTALLATION GUIDE
GUIDE
Installation Guide
The customer should thoroughly read this guide before
operating this product.
Safety Precautions
•
To reduce the risk of electrical shock, disconnect the battery
from the electrical system of the vehicle before starting the
installation.
•
Before inserting fasteners into the mounting surface, ensure
that the underside of the mounting surface is clear of
equipment that might be damaged by the screws.
Installation
1. Use a flat-head screwdriver to insert the magnetic screw in
either the
NOR (Normal)
or
MIR (Mirror)
hole on the rear of
the camera housing to specify how the image is displayed
on a monitor.
Normal is typically used when the camera is mounted facing
forward, and Mirror is typically used when the camera is
mounted facing backward.
2. Using the base as a template, tap or otherwise mark four
screw holes in the desired mounting location.
3. Drill a 0.875 inch hole near the four marked screw holes to
thread the camera cable through.
4. Thread the cable through the drilled hole and use self-
tapping screws or rivets to secure the base to the desired
mounting location.
5. Connect the cable to an appropriate extension cable,
connected to the collision avoidance system control box.
6. Insert the camera, and then the visor, into the camera base
and secure them with the four provided screws loosely.
7. Using the collision avoidance system monitor, adjust the
camera and visor at an angle that produces the desired
image and tighten the four screws securely with a 3 mm hex-
head screwdriver.
Notice to Users:
This document is confidential and contains proprietary
information belonging to Safety Vision, LLC. This document and the information
contained herein cannot be distributed, communicated, reproduced, altered,
or disseminated by any means, in whole or in part, without the express written
consent of Safety Vision, LLC. Possession of this document constitutes the user’s
acceptance of these nondisclosure covenants. The information in this document
is believed to be accurate in all respects. However, Safety Vision cannot assume
responsibility for any consequences resulting from the use thereof. The informa-
tion contained herein is subject to change without notice. Revisions or new
editions to this publication may be issued to incorporate such changes.
Base Installation
Camera and Visor Adjustment
The SV-500A/620A collision avoidance cameras are compact mobile-rated cameras that mount easily in a variety of
orientations. The camera’s infrared illuminators automatically activate as needed providing you with optimal image
quality. Use the following procedure to install the SV-500A/620A Day/Night Cameras.
