INSTRUCTION FOR INSTALLATION OF PBZ USB PKI DEVICE
This document provides the description of how to install software on computers of users of
PBZCOM@NET internet banking, how to change a PIN and how to unlock the PBZ PKI USB
device. This Instruction consist of the following sections:
1.
Installation of software and downloading of FINA certificates on the PBZ PKI USB
device
2.
Change of a PIN for the PBZ USB PKI device
3.
Unlocking of the PBZ USB PKI device
In order to be able to use eToken NG Flash (Photo 1), eToken 7300 (Photo 2) or eToken
5110 (Photo 3) device, i.e. in order to be able to access the PBZCOM@NET service via the
mentioned devices, one-off installation of software will be required.
NOTE: You should have administrator authority to install software on your computer (the
right/authorisation that permits you to install software). If you do not have administrator
authority, you should contact your IT support. After the installation has been successfully
completed, you should simply plug in the USB device in order to access the PBZCOM@NET
service, which means that administrator authority is no longer required.
Photo 3 - eToken 5110
PBZ USB PKI device
Photo 2- eToken 7300
PBZ USB PKI device
Photo 1– eToken NG Flash
PBZ USB PKI device
