Safegate Group safedock, User Manual

Page: 210 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 4A Stand Configuration Utility Version: 2.7
Page 24 of 26
4.10 CONFIGURATION APPLIED
Here you can see the configuration history of the system, send a new configuration to
the system and also set the time of the system.
To apply a n
ew configuration, enter a comment in the upper box and press the “Apply”
button. The application will then upload the configuration to the system and update its
history file with the entered comment and current computer & user name.
To set the time, simply
click the “Set time” button.
The system automatically saves the last five applied configurations. These can be
retrieved by selecting an earlier configuration in the history and pressing the “Get
previous configuration” button.
FIGURE 4A.18 - CONFIGURATION APPLIED FEATURE
4.11 GET LOGS
This view is used to select docking- and short-logs for retrieval to the local computer.
You can either use standard
Ctrl and Shift selection or use the quick-selection
buttons to select the desired log files. Once selected
press the button “Get selected
files” to start the retrieval process. The logs are saved in the folder <installation
dir>\Logs\<stand name>. This folder can easily be opened by pressing the button
labelled “Open log directory”.
The button “Create support archive” retrieves the selected logs (always at least the
last two days) and also additional files. Additionally, the entire configuration is
archived together with the downloaded files in a single file named <date>
<time><stand name>.sarc in the same directory as the log files.