This guide provides step-by-step instructions, with simple explanations to get you up and running.
For further information, please go to WWW.GLOBEWIRELESS.COM.AU
STEP 1
– ACTIVATE - Flip over this pamphlet for details
STEP 2
– WIRE - As per the diagram
STEP 3
– SEND AN EVENT - Trigger an event from the Alarm Panel
The GL45 obtains the Account Code directly from the Alarm Panel during the first alarm event
STEP 4
– CONTACT CONTROL ROOM – Confirm your event was received
ALL DONE
ACTIVATE ONLINE – SAVE TIME!
R1
T1
R T
–
– Rx Tx
+
1 2 3 1 2 3
OUTPUT INPUT
DIRECT WIRING IS RECOMMENDED
Typical Keyswitch
wiring for use with
Pocket Secure
Dialler
Power
12V
Z
Z
Z
C
C
C
**Make sure you have a common ground between the GL45 and the Alarm Panel**
For direct wiring or keyswitch wiring and
programming for various alarm panels, please refer to
www.globewireless.com.au/technical-support/
OUT - YELLOW
IN - GREEN
IN - RED
OUT - BLACK
QUICK START GUIDE
https://safedial.permaconn.com