© Rear View Safety | All rights reserved
p. 20
14. Go back to the left-hand pad to mark
Point_7
and
Point_8
. Select
the correct point from the Point drop-down menu, then click on the
correct corners in the correct order�
15. Click to select the next image from the View drop-down menu, and then repeat the process of marking the calibration
pad points�
16. Repeat the process until all 8 pad points are defined for each of the four images: left (file marked _l.jpg), right (file
marked _r.jpg), front (file marked _f.jpg), and back (file marked _b-jpg).
A
Calibration Result
confirmation window appears.
Calibrating the Calibration Points and Creating the Calibration File
1. Click
Calibrate
when you have marked all pad corners for all four images.
