32” Public Display Monitor
Quick Installation and Configuration Guide
© Safe Fleet | February 2020 | All rights reserved | Part # 700-1199 R1
Service
If your 32” Public Display Monitor is to be returned for service, please contact the Seon technical support team, provide
the model and/or serial# of your unit, and ask for a
Return Merchandise Authorization (RMA)
number. An RMA# allows
the support team to better track your product when it comes in for service. Please show the RMA# on the outside of the
package.
ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED!
Technical Support
•
Email: [email protected]
•
Phone: 1.844.899.7366
Documentation
Additional copies of this guide, along with other supporting documentation can be
found on the SafeFleet Community (https://community.seon.com/documents/)
Product Overview
This guide covers installation and maintenance of the 32” Public Display Monitor, an industrial-grade color LCD designed for
use in transit vehicles.
Full details are provided for connection to an HDMI source. The monitor also supports a VGA source, two BNC sources
(composite NTSC/PAL) and one loop-through connection.
MVQ-KC320-KIT Package Contents
Component
Part number
LCD monitor package:
• 32” LCD monitor
• M8 1.25x25 VESA mounting bracket screws (4 pcs.)
• HDMI cable – 6 ft./1.8 m
• HDMI lock (pre-attached to monitor)
• HDMI lock cable tie wrap (1 pc.)
• Locking power harness – 16.5”/420 mm
• IR remote
080-1085
External voltage converter 10-36 V DC to 24 V DC
085-1117
Mounting bracket (includes four M8 1.25x25 VESA mounting screws*)
MVQ-V200-MTPLT
Power harness kit:
• Two-conductor cable, 16 AWG – 14.5 ft/4.5 m
• Butt splice connectors (8 pcs.)
• Fuses (one 7.5 A and one 5 A)
• Fuse holders (2 pcs.)
020-1061
* Four extra M8 1.25x25 VESA mounting bracket screws are provided in the MVQ-KC320-KIT Package. Only four are
required.
Installation Diagram
INPUT
OUTPUT
Ground
Routine Maintenance
Cleaning the monitor screen
1. Create a mixture of dish soap or fabric softener and
lukewarm water.
2. Pour the mixture into a spray bottle and seal it shut.
3. Mix the contents together by shaking the bottle.
4. Spray the mixture on the screen and wait 10
minutes.
5. Wipe the screen clean with a soft sponge (do not use
a scouring pad or other abrasive materials).
6. Buff the glass dry using a clean, soft cloth. A
microfiber cloth is acceptable.
Specifications
Feature
Specification
Resolution
1920 x 1080
Viewable area
27.47” x 15.44”
(697.68 x 392.26 mm)
Pixel pitch
0.51075mm (H)×0.51075mm (V)
Display colors
16.7M
Aspect ratio
16:9
Brightness
300 nits
Contrast ratio
3000:1
Viewing angle
178°(H) x 178°(V)
Response time
20 ms
Control
OSD via rear panel push buttons
or IR remote control
Auto-restart after
power loss
Yes (monitor returns to its last
state when power is restored)
Video connectors
HDMI, VGA, Composite NTSC/
PAL (2 inputs, 1 is Loop-Through)
Power requirement
22 - 26 V DC (10 - 36 V DC using
external voltage converter)
Power consumption
≤ 80 W
Enclosure
Steel
Mounting
VESA 200 x 200, 150 x 380, 200 x
380, 260 x 380
Operating tempe32°F to +122°F (0°C to +50°C)
Storage temperature
-4°F to +140°F (-20°C to +60°C)
Dimensions
18.5”(W) x 30.5”(H) x 4.7”(D)
(470 x 773.6 x 119.2 mm)
Weight
27.2 lbs (12.34 kg)
DC 24 V
Black:
to output ground
Red:
to output yellow
Red:
to ACC
5 A fuse
7.5 A fuse
HDMI
VGA
BNC-OUT
Audio In
†
Audio Out
†
BNC1
BNC2
ISP
‡
† Audio In and Audio Out are not
used.
‡ ISP is used for updating firmware
only.
