© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2
inView 360 Fusion Calibration Guide
p. 18
Setting the System for Calibration
Setting pixel pitch for ST(FFT) Mode
The procedure for setting pixel pitch for ST(FFT) mode is similar to above:
1. Select ST(FFT) view mode from the drop-down menu.
2.
In the FFT Pixel Pitch field, enter a value between the min and max range, as calculated by the application.
3.
Click Confirm. A preview of the pixel pitch will appear in the window below.
Setting pixel pitch for NT or ST Mode
The procedure for setting pixel pitch for NT or ST mode is the same, as they share the same data fields. To set the pixel
pitch for either of these modes:
1. Select the appropriate view mode from the drop-down menu.
2. In the
NT Pixel Pitch
field, enter a value between the min and max range, as calculated by the application.
3. Click
Confirm
. A preview of the pixel pitch will appear in the window below.
