3
3
2
1
Then insert the other end of
the rod into the opposite side
of the opposing rod holder at
the BACK of the drawer.
Adjust the rods to parallel the drawer
sides. Position the Bookend Clip so
the end face is against the back of the media – press
the clip against the media until it holds its position.
100493537: 1 of 3; Rev A; Rev Date
26-JUL-2016
For questions or concerns, please call the
Safco Consumer Hot Line
1-800-664-0042
available Monday-Friday 7:30 AM to 5:00 PM (Central Time) (English-speaking operators)
TOOLS REQUIRED:
Screwdriver
PRODUCT WARRANTY CARD
is available online at:
www.safcoproducts.com
4935
A/V Microform Storage Cabinet
A S S E M B L Y INSTRUCTIONS
Slide a C Bookend Clip onto a B Spacer Rod, with
the End Face toward the back of the intended media.
Insert the spacer rods by
fi
rst inserting one end of the rod
into one side of a rod holder at the FRONT of the drawer.
ROD
HOLDER
C
B
END
FACE
WARNING:
Do not fully extend
more than one
drawer at a time
to prevent
accidental tipping
To stack the units, cut the G Rubber Strips to length,
and position as shown. Tape the ends down, and posi-
tion the second cabinet on top.
RUBBER STRIPS TO
PREVENT SLIPPING
Cabinet - Model #4935 shown with
Base - Model #4931, available separately.
G
Front Panel
4
4935-52§
Spacer Rod
24
4935-31NC
Bookend Clip
24
4935-32NC
Keys, Set of 2
1
4930-10NC
Screw
16
4935-23NC
Handle
8
4930-31CR
Rubber Strip, 72”
1
4939-32NC
§
Note: When
corresponding
about parts,
be sure to
state color:
Light Gray (LG).
A
B
C
D
E
F
G
CODE
PARTS LIST
DESCRIPTION
QTY. PART
NO.
Hardware Pack 4935-99NC
Hardware Pack 4935-19NC
1
E
Insert the A Front Panel into the interior of the drawer
front. Fasten using one F Handle and two E Screws
on each end of the drawer.
F
A
2
Minneapolis, MN 55428
www.safcoproducts.com
an LDI Spaces Company
