Safavieh Aino MED9618 Manual Download Page 1

Part List

NOTICE

*Please make sure that you have all parts indicated and they are in good condi�on before you 

begin assembly of this item. Refer to part list and hardware list below for guidance.

*This item should be assembled on a so� surface to prevent scratching the finish during 

assembly.

*This item may require periodic �ghtening.

*If you are having difficulty, our friendly Customer Care team is always here to help. Please 

email 

[email protected] 

*Before beginning assembly of product, make sure all parts are present. Compare parts with

part contents list and hardware contents list.

*If any part is missing or damaged, do not a�empt to assemble the product.

*Es�mated Assembly Time: 90 minutes.

*Tools Required for Assembly (included): Allen Key

PREPARATION

CARE AND MAINTENANCE

Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.

Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid 

common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done

with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces

we recommend applying a quality paste wax shich should be used on a reguler basis to provide

addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how 

much wear the furniture receives.

Model# MED9618
Product Dimensions: 54”Wx16”Dx28”H

WARNING :

WEIGHT CAPACITY:

Warning : Do not stand on media stand.

Warning : Do not over torque bolts.

75 LBS.

A

B

C

D

E

F

G

G

G

H

I

I

L

L

L

J

K

LC20B2

LC20B2

Summary of Contents for Aino MED9618










Reviews: