Phoenix G2 IDU Quick Start Guide
SAF Tehnika JSC
24
6.4
Device name configuration
As the Device Name is visible in the GUI header and in CLI prompt, it is recommended
to set the name of the device according to the location where the device is installed for
easier identification. The name of the device is a string of a maximum length of 13
characters and can be set in the web GUI menu “Config
System
Description”.
Valid characters are as follows: [a…z; A…Z; 0…9; _!@#%*()-+=:;',.?/]
6.5
Modem and Radio configuration
Navigate to “Config
Radio” in the web GUI menu to configure modem and radio
parameters.
Figure 19:
Phoenix G2 IDU modem and radio configuration
The ODU must be connected to the IDU when configuring modem and
radio settings
6.5.1
Modem settings
Following modem parameters can be configured:
Bandwidth
– choose preferred channel bandwidth from drop-down box.
