Phoenix G2 IDU Quick Start Guide
SAF Tehnika JSC
20
6.1.5
Main menu
The main menu located on the left side allows user navigation among all major
sections of the GUI. The administrative role of the current login and the logout button
is displayed above the main menu. The user can expand the menu tree structure
either by using the arrows on the left or using double-click on the desired section. The
menu tree structure is sorted in the following manner to allow successive
configuration and monitoring:
Status
– Informational section designed for link performance monitoring.
Config
– Configuration section. The user can perform configuration of all
necessary parameters from top to bottom as some options may override
consecutive settings, for example, the Design and Mode change invokes a
preset load and changes page layout of the Ports section. It is highly
recommended to save and reboot the device once the first complete
configuration is done.
Maintenance
– A device management section which houses tools for device
configuration backups, FW/License upgrade, log files and troubleshooting
sections, and reboot.
Tools
– Set of various tools for advanced debugging tasks such as Ping,
Terminal, Constellation and Spectrum analysis.
6.1.6
Side bar information frame
The Side Bar located on the left side of the GUI shows the summary of important
device information:
Date
– system date
Time
– system time
Uptime
– time since startup
Refresh status
– indicates the amount of time until the next GUI refresh. The
bar changes its colour to red if the GUI auto-refresh is frozen through the
button
Modem Serial Number
– device Serial Number. It is shown only when it differs
from the License Number
License Number
– the license number
License Type / Status
– shows if the license is permanent or time-limited and
its status
License Expiration
– shows the remaining time until the license expires.
Firmware Version
– version of the device firmware.
Running Design
– active design type.