25
Maintenance Procedures
XL-FW10028UM-en-US Rev B · 2021-08-04 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Pocket Inserts (Figure 58):
Replace if:
The thickness of the pocket insert is
1/16" (1.6 mm) or less.
The pocket inserts are severely
chipped, cracked or gouged.
Brackets:
1. Standard Bracket
(Figure 59)
and
ILS-Style Bracket
(Figure 60)
:
Replace if:
The thickness of the bracket cap at
the top, measured approximately
1/4" (6.4 mm) in from the edge, is
less than 3/8" (9.5 mm).
The brackets are gouged, cracked or
otherwise severely damaged.
Figure 60
Figure 59
Figure 58
STANDARD BRACKET
REPLACE BRACKETS
IF 3/8" (9.5 mm) OR
LESS (EITHER SIDE)
MEASURE 1/4" (6.4 mm)
FROM EDGE (BOTH SIDES)
REPLACE POCKET
INSERTS IF 1/16"
(1.6 mm) OR LESS
REPLACE BRACKETS
IF 3/8" (9.5 mm)
OR LESS
ILS-STYLE BRACKET
