Saetec
-
divisione
Essedomus
Robbiate (Lecco) ITALY
www.essedomus.it
MOUNTING INSTRUCTIONS
SET OF LARGE BRACKETS for fence
cod. EB F02
To be used for Entry Box SPACE and TOWER only
Use this support when you want to fix the mailbox directly onto the
rods of the fence or gate.
It consists of a pair of transepts to be tightened by means of suitable bolts
onto the structure of the fence opposite one another: on the external side the
mailbox is fixed by means of 4 nuts onto the 4 protruding bolts
already preassembled
1.
Place the BRACKET A (the one with 4 protruding screws where the
mailbox will be fixed on) on the outer side of the railing, and the
BRACKET B (the one with the large holes) on the inside, exactly
opposite one another.
2.
Screw the 2 brackets with the appropriate long bolts provided M6x100
by choosing the holes that do not interfere with the fence
3.
Place the mailbox at the outer bracket A setting the 4 holes on the back
on the 4 protruding screws from the bracket so that the mailbox
remains hung on these screws
4.
fix the mailbox vith the 4 blind nuts supplied with the respective flat
washers to be mounted inside on the 4 protruding screws
Now your mailbox is set and ready to use
For proper maintenance periodically clean the exterior and interior with mild
detergents or water.
If over time the hardware of the doors tended to loosen
simply retighten with a spanner and a screwdriver.
