SAESHIN TRAUS SSG10, User Manual

Page: 11 / 48

<BLDC motor designed by SAESHIN’s own technology and know>
- Provide the optimized performance by BLDC motor (0~40,000rpm) and Angle handpiece of several kinds.
<D RILL mode>
* Maximum speed
<SAW mode>
* Maximum speed: 12,500 cycle/min
* Torque: 10 N·cm
* Gear ratio: 3:1
<SHAVER mode>
* Maximum speed: 6,000 rpm (Forward, Reverse motion)
* Frequency (F/R repetition motion):
<Program memory function>
- 9 programmable memories for setting Gear ratio, Speed, Torque, Rotating direction, Irrigation pump and Optic.
<Automatic overload protection function>
- If the load on the bur is higher than set torque, the motor will stop automatically and an Error message will be displayed.
- To release the overload function, press the foot controller once.
<Realtime RPM view system>
- Actual RPM value is displayed on the screen. It makes user can do more delicate operation.
<Motor Auto-calibration function>
- Motor auto-calibration function is that controller check the angle handpiece status to reconcile speed and torque that user wants with
angle handpiece for accurate and safe operation.
- The function is set up when the product is released by manufacturer. And use the function when user repair or change the product.
PRODUCT FEATURES & ADVANTAGES
Gear ratio
Torque
1:1
1~6 N·cm
1:3
1~2 N·cm
1:5
1 N·cm
10:1
5~30 N·cm
20:1
5~80 N·cm
32:1
5~80 N·cm
- The free-running speed of the handpieces shall be in accordance with the manufacturer’s instructions at a tolerance of
±10 % as specified. (Refer to ISO 14457)
Gear ratio
RPM
1:1
40,000 rpm
1:3
120,000 rpm
1:5
200,000 rpm
10:1
4,000 rpm
20:1
2,000 rpm
32:1
1,250 rpm
* Torque
* Gear ratio: 1:1, 1:3, 1:5, 10:1, 20:1, 32:1
* LED: 25,000 lx
RPM
Frequency
300~1,000 rpm
0.5 Hz
1,100~1,800 rpm
1.0 Hz
1,900~2,600 rpm
1.5 Hz
2,700~3,400 rpm
2.0 Hz
3,500~4,200 rpm
2.5 Hz
4,300~5,000 rpm
3.0 Hz
<Beep sound function> (DRILL, SHAVER mode)
- When using reverse direction, ring the beep sound for protecting user confusion.
<Ergonomic foot controller>
- The foot controller is designed ergonomically to control all the functions. And the foot controller provides high convenience.
<Setting with SETUP mode>
- Volume control, Time set, Program reset, Auto Calibration is available.
8