PRODUCT COMPONENTS
PART NAME OF CONTROL BOX
①
②
③
④
⑤
⑥
HANDLE
HANDPIECE HOLDER
FOOT PEDAL CONNECTOR
RPM DISPLAY
SPEED CONTROL DIAL
FUSE BOX
POWER CONNECTION
H
POWER SWITC
VACUUM LEVEL DIAL
VACUUM LEVEL DISPLAY
ON/OFF BUTTON
⑦
Turn off the power when finished work.
■ How to use when select the hand
- Motor rotates when pressing motor
on/off button.
- Motor stops when pressing motor
on/off button one more.
- Press the foot pedal.
Motor rotates during pressing the pedal.
- Motor stops when foot pedal is released.
■ How to use when select the foot
OPERATION PROCESS
① Turn power on at the back of the control box.
② Turn on at the front of the control box.
(Figures show on the rotation speed display and vacuum level display when turning power on.)
③ Select rotation direction.
When FWD lamp turns on, it rotates in forward direction and when REV lamp turns on, it rotates in
reverse direction.
④ Select vacuum mode.
·
In the model of “AUTO”, rotation speed and vacuum level can be controlled simultaneously. (Speed
changes simultaneously by turning rotation speed dial.)
·
In the model of “MANUAL”, rotation speed and vacuum level can be controlled separately.
(Adjustment by each dial)
⑤ Turn on vacuum function by turning on the vacuum ON/OFF button.
(Turn off this function if you don’t use.)
⑥ Select hand/foot mode.
- Change rotation direction when motor stops compeletely.
- Replace the bur when motor stops completely.
- Never operate the motor wihtout dust bag.
BUTTONS ON THE OPERATION PANEL
■ Power button
: When you push the power button, the power turns on and figures
show on the rotation speed display and vacuum level display.
■ Rotation direction select button
: it is used to choose forward/reverse direction.
■ Hand/Foot select button
: When selecting “Hand”, adjust rotation speed or vacuum level by rotating the dial.
: When selecting “Foot”, you can operate by pressing foot pedal.
■ Auto/Manual select button
: When selecting “manual”, rotation speed and vacuum level can be controlled separately.
: When selecting “auto”, rotation speed and vacuum level can be controlled simultaneously.
■ Motor ON/OFF button
: You can operate production
or stop.
■ Vacuum level ON/OFF button
: You can operate vacuum function
or stop.
POWER
HANDPIECE
3. Foot pedal connection: Connect foot pedal.
4. Power cord connection
: Connect power cord to the back part of the
control box.
CONNECTION OF EACH PART
FOOT CONTROLLER
1. Control box
2. Handpiece
3. ON/OFF foot controller
5. Power Cord
6. Dust Bag
7. Handpiece Holder
■ Control box connection
1. Dust bag connection
: Assemble dust bag into the handpiece connector.
2. Handpiece connection
: Connect pins of the hand-piece connector to thecontrol box
correctly. (Pins should be to the upperdirection.
MAINTENANCE OF THE PRODUCT
① Take out the bur and disassemble handle case and motor cap.
② Separate motor by pushing handle case to the front direction.
③ Clean each part with dry cloth.
■ HOW TO CHANGE THE DUST BAG
2
3
