Saeco XELSIS SM7685, User Manual

Page: 15 / 52

Personalizing your drinks
You can adjust the drink settings to your own preference:
1 Tap the Drinks icon.
2 Select your preferred drink.
3 The screen shows the settings you can adjust to your preference. Tap on the arrow on the right (Fig.
8) to go to the next screen for more settings to adjust. Depending on the type of drink, you can
adjust the settings. For coffee drinks you can adjust volume, strength, taste and temperature. For
milk-based drinks you can adjust the milk volume, foam level and the order of brewing coffee and
milk. For hot water you can adjust the volume.
4
Swipe the bars you want to adjust up or down to your preferred level (Fig. 7).
5
You can save these settings to a profile by tapping the 'save' icon (Fig. 14) and selecting an
existing profile or adding a new one (Fig. 15).
Creating a profile
1 Tap the Profiles icon.
2 Select 'Add profile' (Fig. 15).
3 Enter a name for the new profile and confirm (Fig. 16).
4
Select the newly created profile.
5
Add drinks to the profile by selecting 'Add drink' (Fig. 17).
Removing a profile
1
Tap the Profiles icon.
2 Press and hold the icon you want to delete.
3 Select 'Delete' and confirm.
Adjusting machine settings
You can adjust the grinder settings by using the grind setting knob inside the bean container. There
are 12 different grind settings you can choose from. The lower the setting, the stronger the coffee.
Note: You need to brew 2 to 3 drinks before you can taste the full difference.
Note: You can only adjust the grinder settings when the machine is grinding coffee beans.
Caution: Do not turn the grind setting knob more than one notch at a time to prevent damage to the
grinder.
1
Place a cup under the coffee dispensing spout.
2
Open the lid of the bean hopper.
3
Tap the Drinks icon and select Espresso. Then press the start/stop button.
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right
(Fig. 18). Turn the grind setting knob one notch at at time. Each time you have turned the grind
setting one notch, brew a coffee drink to prevent damage to the grinder.
5 Close the lid of the bean hopper.
Adjusting default settings
Use the SETTINGS icon to change the following settings:
- AquaClean: To check the status of AquaClean and install a new one.
13
English