Sacmi Imola CHS Series, Instruction Manual

Page: 20 / 116

T6869
062AZ005A
2 FEATURES
2-4
2.1.1.1 Spacer
The spacer consists of a spacing system of the caps on the belt slide surface.
The double roller spacer is to be considered standard equipment; parts do not require to be replaced for cap size
change. It may be replaced by the model with turn-plate which requires size related parts according to the cap to be
inspected, shown in the figure TURN-PLATE SPACER (OPTIONAL) in this chapter.
FIGURE 2.1.1.1/A - DOUBLE ROLLER SPACER
1 Frame
2 Motor
3 Side guides
4 Upper guide
5 Side guide adjustment
6 Upper guide adjustment
7 Roller height adjustment
8 Rollers
9 Roller width adjustment
10 Flow stop piston
11 Guards
1
2
3
4
5
6
7
8
9
10
11