Sacmi Imola CHS Series, Instruction Manual

Page: 17 / 116

062AZ005A
FEATURES 2
2-1
2 FEATURES
2.1 MACHINE DESCRIPTION
The CHS family of machines control continuous plastic and aluminum cap quality.
The caps are analyzed by a computerized inspection system (Control Vision System) and are transferred to the
production cycle, if necessary.
The CHS system can be applied to any type of machine that produces caps (new or already in operation) provided
by any supplier, or it can be used as stand alone. The main parts of the machine are illustrated in the figure.
The family includes two types of machines:
- CHS100 : single conveyor belt system that permits the inspection of caps coming from one direction;
- CHS200 : in-line double conveyor belt system that permits the inspection of caps coming from several directions
and the check of the internal, external and side areas.
2.1.1 MAIN DEVICES
For CHS100 they can be summarized as follows:
- machine base
- spacer
- reject system
- electrical cabinet
- control panel
- monitor
- pneumatic system
- suction device
- air conditioner
- personal computer
- top guard (optional)
- final diverter (optional)
- bottom guard (optional)
- conveyor belt
- inspection system.
For CHS200 they can be summarized as follows:
- machine base
- spacer
- reject system
- electrical cabinet
- control panel
- monitor
- pneumatic system
- suction device
- air conditioner
- personal computer
- top guard (optional)
- final diverter (optional)
- bottom guard (optional)
- standard conveyor belt
- overturned conveyor belt
- top inspection system
- bottom inspection system.