Sacmi Imola CHS Series, Instruction Manual

Page: 115 / 116

062AZ005A
DISMANTLING 9
9-1
9 DISMANTLING
9.1 DECOMMISSIONING
E0004
WARNING!
Only skilled personnel properly trained on how to work on and handle the machine are authorized to work on it.
Use only adequate lift means and equipment that comply with current regulations and standards.
When the machine is not going to be operated for an extended period or is no longer going to be used, follow the
directions given below to make it inoperative.
- Use the factory main switch to cut off electrical power to the machine.
- Unplug the power cable.
- Disconnect the compressed air connection between the pneumatic unit and factory’s air mains.
- Activate the safety devices, if necessary.
- Thoroughly clean the entire machine paying special attention to the working parts, applying protective lubricant.
- Close the machine and electrical cabinet doors to prevent damage from tampering and dust from getting in.
E0004
WARNING!
If the machine has to be moved from one factory to another, contact SACMI Technical Service to obtain information
about packing and shipment.