Sacmi CVS Series, Technical Documentation Manual

Page: 11 / 68

004AZ011B
GENERAL INFORMATION 1
1-3
1.5 WARRANTY
SACMI shall be held responsible only for the electronic equipment as it was configured at the time of delivery.
Any operations that alter the configuration of the electronic equipment or work cycle must be carried out or duly
authorized by SACMI's Engineering Dept.
SACMI shall not be held responsible for damages deriving from the use of non-original spare parts.
The warranty is valid only if the electronic equipment has been correctly used in accordance with the instructions
provided by the manufacturer.
The warranty does not cover parts subject to wear and tear.
The warranty is void in the following cases:
- required maintenance jobs not performed;
- altering, tampering or misuse of the machine;
- if spare parts different from the ones originally installed in the electronic equipment are used;
- if changes and/or repairs are carried out by personnel not duly authorized by SACMI.
SACMI shall not be held liable for electronic equipment damage caused by misuse or malfunctioning of other
equipment connected to the electronic equipment.
The warranty covers only electronic equipment damage and/or malfunctions with explicit exclusion of compensation
for any additional damage. In any case, the seller shall not be held responsible for loss due to lack of or reduced
production, as well as any special, indirect or consequential loss of any nature whatsoever.
As regards any annexes or modifications to the above, in any case the general terms and conditions set forth in the
contract shall be abided.
D0003275_00
NOTICE
The electronic equipment operators and maintenance staff are not responsible for carrying out operations under
warranty, special maintenance and repairs. These operations are to be performed only by the manufacturers
specially trained technicians. For this reason, these types of operations are not dealt with in this manual.
1.6 ATTACHMENTS
The documents listed below supplement this instructions manual.
- INSTRUCTIONS B.
(This document may be split up into several handbooks. It contains information on how to use the control system
and about the electric and electronic components found in the equipment).
- WIRING DIAGRAMS.
- AIR CONDITIONER DOCUMENTATION (if provided).