SACKit TOUCHit S, User Manual

Page: 6 / 33

6
How to pair TOUCHit S and your device
1 . For first use: Long press the X Button for 10 seconds. After the first 5 seconds, you will hear the
ON sound . Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by
flashing the power indicator red and blue
2 . Switch on Bluetooth on your device
3 . Choose “TOUCHit S” under Bluetooth settings on your device . Your headphones are now con-
nected with your device
4 . Start playing music on your device
5 . Long press the X button to turn off your TOUCHit S headphones
6 . TOUCHit S will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won’t appear on the new device .
THE DEVICE
How to use the Active Noise Cancellation function
1 . Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the
headphones in Active Noise Cancellation mode
2 . When you don’t need the Active Noise Cancellation function, turn the ANC function of by pus-
hing the ANC button
3 . Active Noice Cancellation can be activated and deactivated even when the TOUCHit S Head-
phone is turned off . The Active Noise Cancellation will also remain on even when you turn the
TOUCHit S Headphone off .
Operation instructions for use after first pairing
1 . After first time pairing your TOUCHit S headphones and
2 . Bluetooth device will automatically reconnect, the LED light will blink blue once TOUCHit S is
successfully paired .
3 . Turn the headphones on by holding down the X button until you hear the ON sound
4 . Long press X button to turn off TOUCHit S
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3 .5mm audio cable when you do not wish to use Bluetooth connection or when the battery
needs recharging . In-line use is possible when the battery is empty .
For in-line use:
• Connect the 3 .5mm plug into your TOUCHit S Headphone 3 .5mm jack, then connect the other
3 .5mm plug to your device 3 .5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music