SOUTHERN AVIONICS COMPANY
SE Series Installation and Setup
6-18
System Site Configuration
Press the ENABLE to toggle “ENABLED” or “DISABLED” on the LCD screen, then the ENTER
key to exit. ENTER must be clicked to store selection or it will be lost.
WEB WATCH
Operates similar to the LCD DISPLAY above.
6.10 DCAD (DC Automatic Disconnect)
LCD DISPLAY
Press the
SPCL FCTN
key, then the
9
key to open the
SE SYSTEM
menu, as shown below.
Press the
1
key repeat to toggle “ON” or “OFF” on the LCD screen, then the ENTER key to exit.
ENTER must be clicked to store the selection or it will be lost.
WEB WATCH
Operates similar to the LCD DISPLAY above.
------------ TRANSMITTER 1 -----------
MONITOR . . . . . . . . . . . . [ENABLED]
Press ENTER key to confirm, then exit.
-------------- SE SYSTEM -------------
1. DCAD . . . . . . . . . . . . . . [OFF]
2. Network
Press ENTER key to confirm, then exit.
