SOUTHERN AVIONICS COMPANY
SE Series Installation and Setup
6-13
System Site Configuration
Change the factor number and press return to achieve the proper LCD RF power readout
agreeing with the scope.
WEB WATCH
NONE
6.5.5 Antenna Calibration
LCD DISPLAY
NONE
WEB WATCH
•
Under Calibration, verify the antenna factor is set to 10 (default).
•
The actual ATU meter should be made to agree with the value of antenna current
displayed by adjusting the factor until it poles.
When the transmitter calibration is complete click the
Back
button to close the
Transmitter
Calibration
window and return to the Main window.
6.6 Network IP Configuration
LCD DISPLAY
Press the
SPCL FCTN
key, then the
9
key to open the
SE SYSTEM
menu, as shown below.
------ POWER TARGET CALIBRATION -------
P.T. Factor should be between 5 and 250.
Enter power target factor: [100]
