SAC 3600 Series, Operator'S Manual, Page: 66 / 134

Page # 66
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.


•

 
  

  


                   





 

 • 



  



 
•


            


All models equipped with an unloading conveyor will require greasing at the shaft bearings. These bearings will require 1
pump every 16 hours or 50 loads. Grease fitting locations are shown in the diagrams that follow:
Magnet Chute Assembly (If equipped)
On machines equipped with the discharge magnet chute assembly, the magnet should be periodically cleaned off to
remove all of the metal debris accumulated through machine operation.
CONVEYOR LUBRICATION