background image

62

Sabine Smart Spectrum

®

 Wireless

© 2011  Sabine

, Inc.

from him of this product.  If the DEALER is unable to provide the neces-

sary warranty service, you will be directed to the nearest other SABINE 

AUTHORIZED DEALER which can provide such service. 

OR: 

b.  Ship the defective item, prepaid, to:
   

SABINE, INC. 

   

13301 NW US HIGHWAY 441

   

ALACHUA, FL 32615-8544

Include therewith a complete, detailed description of the problem, together 

with a legible copy of the original PROOF OF PURCHASE and a complete 

return address. Upon Sabine’s receipt of these items:
If the defect is remedial under the limited warranties and the other terms 

and conditions expressed have been complied with, Sabine will provide 

the necessary warranty service to repair or replace the product and will 

return it, FREIGHT COLLECT, to you, the purchaser.
Sabine’s liability to the purchaser for damages from any cause whatsoever 

and regardless of the form of action, including negligence, is limited to the 

actual damages up to the greater of $500.00 or an amount equal to the 

purchase price of the product that caused the damage or that is the subject 

of or is directly related to the cause of action.  Such purchase price will be 

that in effect for the specific  product when the cause of action arose. This 

limitation  of liability will not apply to claims for personal injury or damage 

to real property or tangible personal property allegedly caused by Sabine’s 

negligence. Sabine does not assume liability for personal injury or property 

damage arising out of or caused by a non-Sabine alteration or attachment, 

nor does Sabine assume any responsibility for damage to interconnected 

non-Sabine equipment that may result from the normal functioning and 

maintenance of the Sabine equipment.

UNDER NO CIRCUMSTANCES WILL SABINE BE LIABLE FOR ANY LOST PROFITS, LOST 
SAVINGS, ANY INCIDENTAL DAMAGES OR ANY CONSEQUENTIAL DAMAGES ARISING 
OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF SABINE HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 THESE LIMITED WARRANTIES ARE IN LIEU OF ANY AND ALL WARRANTIES, EXPRESS 
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR USE; PROVIDED, HOWEVER, THAT 
IF THE OTHER TERMS AND CONDITIONS NECESSARY TO THE EXISTENCE OF THE 
EXPRESS LIMITED WARRANTIES, AS HEREINABOVE STATED, HAVE BEEN COMPLIED 
WITH, IMPLIED WARRANTIES ARE NOT DISCLAIMED DURING THE APPLICABLE ONE-
YEAR PERIOD FROM DATE OF PURCHASE OF THIS PRODUCT.
SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY 
LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.  
THESE LIMITED WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 
ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
THESE LIMITED WARRANTIES ARE THE ONLY EXPRESS WARRANTIES ON THIS PROD-
UCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY OR AGREEMENT 
BY ANY PERSON SHALL BE VALID OR BINDING UPON SABINE.

In the event of any modification or disclaimer of express or implied war-

ranties,  or  any  limitation  of  remedies,  contained  herein  conflicts  with 

applicable  law,  then  such  modification,  disclaimer  or  limitation,  as  the 

case may be, shall be deemed to be modified to the extent necessary to 

comply with such law.
Your remedies for breach of these warranties are limited to those remedies 

provided herein, and Sabine gives this limited warranty only with respect 

to equipment purchased in the United States of America.
INSTRUCTIONS-WARRANTY REGISTRATION CARD 
1.  Mail the completed WARRANTY REGISTRATION CARD to: 
  SABINE, INC. 
  13301 NW US HIGHWAY 441 
  ALACHUA, FLORIDA 32615-8544 USA
  OR: 

Register online at www.Sabine.com

a. Keep the PROOF OF PURCHASE.  In the event warranty service 

is required during the warranty period, you will need this document. 

There will be no identification card issued by Sabine, Inc.

2.  IMPORTANCE OF WARRANTY REGISTRATION CARDS AND NOTI-

FICATION OF CHANGES OF ADDRESS: 
a. Completion  and  mailing  of WARRANTY  REGISTRATION  CARDS  

- Should notification become necessary for any condition that may 

require correction, the REGISTRATION CARD will help ensure that 

you are contacted and properly notified. 

b. Notice of address changes - If you move from the address shown on 

the WARRANTY REGISTRATION CARD, you should notify Sabine 

of the change of address so as to facilitate your receipt of any bul-

letins  or  other  forms  of  notification  which  may  become  necessary 

in connection with any condition that may require dissemination of 

information or correction.

3.  You may contact Sabine directly by telephoning (386) 418-2000.
4.  Please have the Sabine product name and serial number available when 

communicating with Sabine Customer Service.

Manufactured by:  Sabine, Inc.
   

13301 NW US Highway 441

   

Alachua, Florida 32615-8544  USA 

   

Phone: +USA (386) 418-2000

   

Fax: +USA (386) 418-2001

THIS  LIMITED WARRANTY VALID  ONLY WHEN  PURCHASED  AND 

REGISTERED IN THE UNITED STATES OR CANADA. ALL EXPORTED 

PRODUCTS ARE SUBJECT TO WARRANTY AND SERVICES TO BE 

SPECIFIED  AND  PROVIDED BY THE AUTHORIZED DISTRIBUTOR 

FOR EACH COUNTRY.
Ces clauses de garantie ne sont vaiables qu’aux Etats-Unis et au Canada. 

Dans tous les autres pays, les clauses de garantie et de maintenance 

sont fixees par le distributeur national et assuree par lui selon la legisla-

tion en vigueur.
Diese Garantie ist nur in den USA and Kanada gultig. Alle Export-Produkte 

sind der Garantie und dem Service des Importeurs des jewelligen Landes 

untervorfen.
Esta garantia es valida solamente cuando el producto es comprado en E.U. 

continentales o en Canada. Todos los productos que sean comprados en 

el extranjero, estan sujetos a las garantias y servicio que cada distribuidor 

autorizado determine y otrezca en los diferentes paises.

ONE-yEAR LIMITED WARRANTy/REMEDy

SABINE, INC. (“SABINE”) warrants this product to be free from defects 

in  material  and  workmanship  for  a  period  of  one  (1)  year  from  date  of 

purchase PROVIDED, however, that this limited warranty is extended only 

to the original retail purchaser and is subject to the conditions, exclusions 

and limitations hereinafter set forth:

CONDITIONS, EXCLUSIONS AND LIMITATIONS OF 

LIMITED WARRANTIES

1. These limited warranties shall be void and of no effect if:

 

a. 

The first purchase of the product is for the purpose of resale; or

 

b. 

The  original  retail  purchase  is  not  made  from  an  AUTHORIZED 

SABINE DEALER; or

 

c. 

The product has been damaged by accident or unreasonable use, 

neglect, improper service or maintenance, or other causes not arising 

out of defects in material or workmanship; or

 

d. 

The serial number affixed to the product is altered, defaced or re-

moved; or 

 

e. 

The power supply grounding pin is removed or otherwise defeated. In 

the event of a defect   in material and/or workmanship covered by this 

limited warranty, Sabine will repair the defect in material or workman-

ship or replace the product, at Sabine’s option; and provided, however,  

that, in any case, all costs of shipping, if necessary, are paid by you, 

the purchaser.

2. NiMH batteries included with the original purchase are warranted for 

ninety (90) days from date of purchase.
THE WARRANTY REGISTRATION CARD SHOULD BE ACCURATELY 

COMPLETED, MAILED TO AND RECEIVED BY SABINE WITHIN FOUR-

TEEN (14) DAYS FROM THE DATE OF YOUR PURCHASE.
In order to obtain service under these warranties, you must: 
a.  Bring the defective item to any Authorized SABINE DEALER and present 

therewith the ORIGINAL PROOF OF PURCHASE supplied to you by 

the AUTHORIZED SABINE DEALER in connection with your purchase 

Cautions & Warranty

ACCORDING TO OSHA, ANY EXPOSURE IN EXCESS OF THE ABOVE PERMISSIBLE 
LIMITS  COULD  RESULT  IN  HEARING  LOSS.  EAR  PLUGS  OR  PROTECTORS  IN 
THE EAR CANALS OR OVER THE EARS MUST BE WORN WHEN OPERATING THIS 
DEVICE IN ORDER TO PREVENT A PERMANENT HEARING LOSS, IF EXPOSURE 
IS  IN  EXCESS  OF THE  LIMITS  AS  SET  FORTH  ABOVE.   TO  ENSURE  AGAINST 
POTENTIALLY DANGEROUS EXPOSURE TO HIGH SOUND PRESSURE LEVELS, IT 
IS RECOMMENDED THAT ALL PERSONS EXPOSED TO EQUIPMENT CAPABLE OF 
PRODUCING HIGH SOUND PRESSURE LEVELS SUCH AS THIS DEVICE BE PRO-
TECTED BY HEARING PROTECTORS WHILE THIS UNIT IS IN OPERATION.

EXPOSURE TO  EXTREMELY  HIGH  NOISE  LEVELS  MAY  CAUSE  A  PERMANENT 
HEARING LOSS.  INDIVIDUALS VARY CONSIDERABLY IN SUSCEPTIBILITY TO NOISE 
INDUCED HEARING LOSS, BUT NEARLY EVERYONE WILL LOSE SOME HEARING IF 
EXPOSED TO SUFFICIENTLY INTENSE NOISE FOR A SUFFICIENT TIME. THE U.S. 
GOVERNMENT’S OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) 
HAS SPECIFIED THE FOLLOWING PERMISSIBLE NOISE LEVEL EXPOSURES:

 90

 92

 95

 97

100

SOUND

LEVEL
IN dBA

DURATION/DAY

IN HOURS SLOW

RESPONSE

1-1½ 

102

105

½ 

110

¼  or less 

115

SOUND

LEVEL
IN dBA

DURATION/DAY

IN HOURS SLOW

RESPONSE

CAUTION!

FBX and FBX Feedback Exterminator

®

 are registered trademarks 

of Sabine, Inc., and are the brand names of its line of automatic 

feedback  controllers.    Covered  by  U.S.  Patent  No.  5,245,665, 

Australian Patent No. 653,736, Canadian Patent No. 2,066,624-2, 

German  Patent  No.  69118486.0,  and  U.K.  Patent  No.  0486679.  

Other patents pending. True Mobility

®

 is a trademark of Sabine, 

Inc. Copyright 2004 Sabine, Inc.  All rights reserved.

MADE IN USA                  WWW.SABINE.COM

Summary of Contents for SWM7000 -

































































Reviews: