Quick User Guide
Please read this guide before using your saber equipped with a Golden Harvest v3 for the first time. It
describes the menu navigation, but gives also important information on how to charge your saber
properly for example.
Menu Navigation
The default
menu navigation for a single momentary button is shown below. For alternative
navigation layouts, please check the manual of the Golden Harvest v3 which can be found on
https://sabertec.net/downloads/
. The color changing features are only available for Hero sabers.
FUNCTION
TRIGGERING WITH ONE MOMENTARY SWITCH
Power On
Tap the button
Enter Effect Menu
Hold the button, then hold it again. Point the saber
upwards while doing this.
∟
Change Blade Profile*
∟
Slowly twist the saber
∟
Change On Top Effect*
∟
Tap the button
∟
Save And Leave
Hold the button until the confirmation sound is played
Enter Accent Menu
Hold the button, then hold it again. Point the saber
downwards while doing this.
∟
Change Standby Accent Profile*
∟
Tap the button
∟ Enter
Ignited Accent Submenu
∟
Hold the button for 1 s
∟
Change Ignited Accent Profile*
∟
Tap the button
∟
Save And Leave
Hold the button until the confirmation sound is played
Enter Color Change Menu
Hold the button, then tap it. Point the saber upwards
while doing this.
∟
Cycle Through Preset Color
Profiles
∟
Slowly twist the saber
∟
Save And Leave
Hold the button
Enter Lockup Mode
Hold the button, release it and then twist the saber. Point
the saber upwards while doing this.
∟
Leave Lockup Mode
Tap the button
Enter Drag Mode
Hold the button, release it and then twist the saber. Point
the saber downwards while doing this.
∟
Leave Drag Mode
Tap the button
Enter Melt Mode
Hold the power button, release it and then perform a stab
∟
Leave Melt Mode
Tap the power button
Blaster Block
Tap the button
Force Push
Hold the button while swinging the saber
Activate Power Saving
Hold the power button while performing a stab
Deactivate Power Saving
Hold the power button while performing a stab
Power Off
Hold the power button until the saber shuts down
Enter Sound Font Menu
Hold the button before the blade is ignited, then release
it. Point the saber upwards while doing this.
∟ Go To Nex
t Sound Font*
∟
Slowly twist the saber
