SAB SABIP1500, User Manual, Page: 40 / 86

39
39
Figure 4.20
If you don’t know the DNS server, you can use the same settings as the Default Gateway.
4.3.2 Wireless Settings
Step 1: Choose “ Settings ” on the top of the camera interface, and go to the “ Network ” panel on the left side of
the screen, then click “ Wireless Settings .”
Click the Scan button and the camera will detect all wireless networks around the area. It should also display
your router in the list.
Set the same Subnet Mask
and gateway of the camera
with your PC.
There are two DNS servers,
you can set any of them.
Same with gateway is also